FAQs
Help – there's no or very little
suction. What can I do?
It's most likely that there's some air
getting in somewhere, which means
the pump won't work properly.
•
Check that each air tube is
connected securely at both ends
and there are no kinks in it.
•
Make sure that the soft silicone
cup is securely attached to the
horn at the top and bottom and
forms a comfortable seal around
your breast. Adjust your position
if you need to.
•
Check each duck-bill valve is
clean and opens easily. Give it a
gentle squeeze if it's stuck.
•
Check each diaphragm and
diaphragm cap are secure and
there are no signs of damage.
Will milk get sucked into the power
unit?
No. If you have fitted the diaphragm
and cap properly, the air tube and
pump are separated from your milk
and can't come into contact with the
power unit. It's what's known as a
closed pump.
Help, the pump is making a funny
sound
Check if you have selected single or
double mode. And that you have the
air tube/s connected correctly. If you
are using a single pump and have
the double mode selected (shown by
the double circle lit up on the LED
display), or have a single air tube
attached to the wrong connector, the
pump will run continuously, and make
a noise when it's trying to provide
suction to the unattached pump
handset. Choose the correct mode
and connection for single or double
pumping.
Why do I have to use a Tommee
Tippee bottle?
The Tommee Tippee Made for Me™
electric breast pump is designed to
be a perfect fit for Tommee Tippee
bottles and pouches (excludes
Tommee Tippee Closer to Nature
glass bottles). You may get leaks
and spills if you use other brands of
bottles and containers that don't fit
correctly.
WARNING
No OVER-CURRENT RELEASES or
FUSE is needed since only consumer
grade batteries are used, which have
limited power output.
Warning against servicing and
maintenance while the ME
EQUIPMENT is in use.
Disposal of waste products, residues,
etc., and of ME EQUIPMENT and
ACCESSORIES at the end of their
EXPECTED SERVICE LIFE are
identified in the instruction for use.
Warnings identifying nature of
HAZARD when replacement
of a component could result in
unacceptable RISK, and when
replaceable by SERVICE PERSONNEL
all information necessary to safely
replace the component
No OVER-CURRENT RELEASES or
FUSE is needed since only consumer
grade batteries used, which has
limited power output.
10