CONTROLS
Malfunction Indicator Light
The Malfunction Indicator Light (MIL) blinks to
warn when sensors detect an engine system
problem. Refer to the engine manufacturer's
owner's manual for detailed instructions on
determining the type of malfunction and the
appropriate steps for repair.
Blade Switch
To engage the mower deck, pull the knob out;
mower blades are disengaged when the knob is
pressed down.
Ignition Switch
The ignition switch is placed on the control panel
and is used to start and stop the engine. On
models equipped with headlights, turn the key
clockwise to ACCESSORY for headlight use.
14
Service Meter
The service meter displays the total operating
time with the blade activated.
After every 50 hours of operation, an oil can icon
will appear and stay on for two hours, before
an automatic reset occurs. To manually reset
the meter, turn the key off and on five times at
one second intervals. To service the engine and
mower, see the Service Journal of this manual.
Seat Adjustment Lever
The seat can be adjusted lengthways with the
lever located at the right side of the seat (as
seen by the driver in the seat). When making
adjustments the lever is moved upward.
Adjustments may be made to seat suspension by
turning the center knob.
IMPORTANT INFORMATION
be adjusted while unit is in motion.
Seat must not