Moving Machine By Hand - Husqvarna PZ 72 Manual Del Operador

OPERATION

Moving Machine By Hand

Bypass Valves
Bypass valves are used to release the system so
the machine may be moved by hand when not
running.
Hydro Pumps
Pump release valves are located at the front and
rear of the pump. Tilt the seat forward and remove
the fan cover to gain access to the pump.
Use a 5/8" wrench or socket and ratchet. Turn the
pump release valve one half turn. Reverse the
procedure to reset the pump.
Load the machine into truck or trailer by driving up
ramps in low gear. DO NOT LIFT! The machine is
not intended to be lifted by hand.
WARNING! Do not make adjustments
unless:
• the engine is stopped,
• the ignition key is removed,
• the park brake is activated
WARNING! Use extreme caution when
loading the machine into a truck or trailer using
ramps. There is the possibility of serious injury
or death if the machine falls off the ramps.
20