Sección 9 − Accesorios/Consumibles - Hobart Welders Handler 190 Manual Del Operador

SECCIÓN 9 − ACCESORIOS/CONSUMIBLES
9-1. Accessories
PART NO.
770 187
194 776
195 186
245 926
300 796
9-2. Consumables
ITEM
Contact Tips
.023/.025 in (0.6 mm)
.030 in (0.8 mm)
.035 in (0.9 mm)
.045 in (1.2 mm)
MIG Nozzle (Standard)
Gasless Flux Cored Nozzle
Tip Adapter
Replacement Liners
.023/.025 in (0.6 mm)
.030/.035 in (0.8/0.9 mm)
.035/.045 in (0.9/1.2 mm)
*Available at farm and tool supply retailers.
**Available at Hobart/Miller welding distributors.
9-3. Replacement Drive Rolls
PART NO.
237 338
202 926
246 565
9-4. Regulator/Flowmeter
PART NO.
212 492*
*Available at Hobart/Miller welding distributors.
A complete Parts List is available on-line at www.HobartWelders.com
To maintain the factory original performance of your equipment, use only Manufacturer's Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-248 841 Página 36
DESCRIPTION
Running Gear/Cylinder Rack
Small Running Gear/Cylinder Rack
Protective Cover
H100S4-10 Replacement Gun
SpoolRunner 100 Spool Gun
HOBART PACKAGE NO.*
770 174 (5 per package)
770 177 (5 per package)
770 180 (5 per package)
770 183 (5 per package)
770 404
770 487
770 402
196 139
196 139
196 140
For All Feed Head Assemblies
WIRE DIAMETER
INCHES (mm)
.023/.025 (.6) and .030/.035 (.8 and .9)
.030/.035 (.8 and .9) and .045 (1.2 VK Groove)
.030/.035 (.8 and .9) V/VK Grooves
DESCRIPTION
Regulator/Flowmeter
REMARKS
For One Small Gas Cylinder, 100 lb (45 kg) max.
For One Small Gas Cylinder, 75 lb (34 kg) max.
Weatherproof nylon
10 ft length/.030-.035 wire size
For push/pull wire feeding
MILLER PACKAGE NO.**
087 299 (10 per package)
000 067 (10 per package)
000 068 (10 per package)
000 069 (10 per package)
169 715
226 190
169 716
194 010
194 011
194 012
REMARKS
For use with CO shielding gas, 10−50 CFH. Use
2
with gas hose 144 108.