Features And Controls; Know Your Pressure Washer - Craftsman 580.752541 Instrucciones De Uso

KNOW YOUR PRESSURE WASHER

Read the Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
J
K
L
M
N
A - Spray Gun — Controls the application of water onto cleaning
surface with trigger device. Includes trigger lock.
B - Selector Nozzle — Contains five different spray pattern nozzles
for various applications.
C - Accessory Tray — Provides convenient storage for accessories,
such as gun, spray tips, etc.
D - Nozzle Extension with Quick Connect — Allows you to switch
between selector nozzle and optional nozzle accessories.
E - Project Pro® PerfectMix™ Siphon — Mixes concentrate with
pressure washer spray.
F - Warning/Operating Instructions Tag — Identifies hazards and
proper procedure to start/stop pressure washer.
G - Fuel Tank — Fill tank with regular unleaded fuel. Always leave
room for fuel expansion.
H - High Pressure Hose — Connect one end of hose to water pump
and the other end to spray gun.
J - Choke Lever — Used when starting a cold engine.
K - Fuel Valve — Used to turn fuel supply on and off to engine.
L - Throttle Lever — Sets engine in starting mode for recoil starter
and stops a running engine.
M - Air Filter — Protects engine by filtering dust and debris out of
intake air.

FEATURES AND CONTROLS

N - Recoil Starter — Used for starting the engine manually.
P - Detergent Siphoning Tube/Filter — Use to siphon pressure
R - Bottle Bracket — Cleaning solution bottle fits in wire form
S - Automatic Cool Down System — Cycles water through pump
T - Water Inlet — Connection for garden hose.
U - Oil Drain — Drain engine oil here.
V - Oil Fill — Check and add engine oil here.
W - High Pressure Outlet — Connection for high pressure hose.
X - Pump — Develops high pressure.
Items Not Shown:
Identification Label (near rear of base plate) — Provides model
and serial number of pressure washer. Please have these readily
available if calling for assistance.
Engine Identification — Provides model, type and code of engine.
Please have these readily available if calling for assistance.
6
washer safe detergents into the low pressure stream.
bracket here. Concentrate bottle not included.
when water reaches 125°-155°F. Warm water will discharge
from pump onto ground. This system prevents internal pump
damage.
X
W
V
U
T
S
R
P