ASSEMBLY
1
Place bottom shelf upside down. Insert Caster Pin into the caster mounting plate to lock
caster in place for tightening, shown A. Spin the caster clockwise into the threads on the
bottom shelf until secure. Remove the Caster Pin and repeat for remaining casters. Make
sure the two locking casters are secured at the rear and the non-locking casters are secured
at the front. After all 4 casters are secured, save the Caster Pin for future caster removal or
attachment.
Attach side panels to bottom shelf using two 1/4-20x1/2" screws per panel.
2
IMPORTANT: Panel with large hole must be on Right side of bottom shelf.
Left side panel
Magnet
Non-locking caster
Bottom shelf
Front
Rear
1/4-20x1/2"
screw
Front
A
Caster Pin
Locking caster
Caster pin
1/4-20x1/2" Screw
Right side panel
Qty. 4
464323313 · 17