Remove the two factory-attached screws and washers from the side-burner valve bracket (A).
14
Use the same screws and washers to attach the side burner bezel and valve bracket to the side
shelf fascia (A). Press side burner control knob onto valve stem (A).
Insert side burner tube and ignitor wire through hole in front wall of side shelf. Fit front of
burner tube securely over valve (D). Fit slot at rear of tube over tab on rear bracket (B). Secure
rear of burner with cotter pin clip (C).
A
Side burner
control knob
TOP
OFF
B
Bracket
26 · 464323313
Side burner Bezel
Screws and washers
removed from valve
bracket
5
4
3
Sideburner
tube
Valve stem
come through
this hole
Valve bracket
Valve stem
2
1
C
D
Cotter pin
Qty.1
Cotter pin
Burner tube
Valve