Makita DSC250 Manual De Instrucciones página 6

10. Disconnect the tools power supply, by remov-
ing the Battery and engaging the Trigger
Switch Lock, whenever one of the following
situations occur.
· The tool is not in use or is being serviced.
· Any parts, such as a blade, are being replaced.
· There is a recognised hazard.
Failure to do so may result in accidental operation
and damage or injury.
11. Only use the specified accessories or
attachments.
· Use only the accessories or attachments
described in this Instruction Manual and the
Makita catalog. Use of any other accessories or
attachments may result in an accident or injury.
12. Do not expose the battery to fire as it may
explode or generate poisonous substances.
13. Under conditions of abuse, liquid may be
ejected from the battery; avoid contact.
· If contact accidentally occurs, flush with clear
water.
· If liquid contacts eyes, flush with clear water and
seek immediate medical help as it may result in
loss of eyesight.
14. If operating time has reduced very signifi-
cantly, stop operating immediately. There is a
risk of overheating which may result in burns
and even an explosion.
CAUTION
1. Work area safety
· Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Keep Children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
3. Store idle power tools correctly.
· Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of
untrained users.
· Do not store the tool and battery in locations
where the temperature may reach or exceed 50°C
(122°F), such as a metal box or car in summer.
It may shorten the battery service life or result in
smoke and fire.
4. Do not force power tools.
· Use the tool at the proper speed and for which the
tool was designed. Cutting too fast may result in
damage to the tool or personal injury.
· Do not use the tool in a way that could cause the
motor to lock. It may result in smoke or fire.
5. Use the power tool for the right application.
· Use the power tool, its attachments and blades
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Do not use for a big tool operation.
Using for applications that are different from those
intended may result in personal injury.
6. Dress properly.
· Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts.
Loose clothes, jewelry or long hair can be caught
in moving parts.
· Wear rubber gloves and non-skid safety shoes
when operating a power tool outdoors. Slippery
gloves or shoes may result in a personal injury.
7. Do not abuse a cord of charger.
· Never use the cord for carrying, pulling or unplug-
ging the power tool.
· Keep cord away from heat, oil, sharp edges or
moving parts.
· Make sure a cord is located where it will not be
stepped on, tripped over, or otherwise subjected
to damage or stress. Damaged or entangled cords
increase the risk of electric shock or fire.
8. Do not overreach.
· Keep proper footing and balance at all times. This
enables better control of the power tool in unex-
pected situations.
9. Maintain power tools.
· Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
Damaged blades may cause personal injury.
· Keep handles dry, clean and free from oil and
grease. Slippery handles may result in personal
injury.
· Check power cord of the charger regularly.
Damaged cord will increase risk of electric shock
or short circuit resulting in fire.
10. Remove any adjusting key or wrench before
turning the power tool on.
· A wrench or key left attached to a rotating part of
the power tool may result in personal injury.
11. When charging outdoors, use a cabtyre cable
or a cabtyre extension cord.
· Use only the accessories or attachments
described in this Instruction Manual and the
Makita catalog. Use of any other accessories or
attachments may result in an accident or injury.
12. Stay alert, watch what you are doing and use
common sense when operating a power tool.
· Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medica-
tion. A moment of inattention while operating
power tools may result in serious personal injury.
13. Check for damaged parts before use.
· Check safety covers and other parts that may
affect the tools function for breakage or damage. If
damaged, replace or repair before use.
· Check for misalignment or binding of moving
parts, breakage of parts and any other condition
that may affect the power tool's operation. If dam-
aged, have the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
· Do not use damaged extension cord. If damaged
replace it before use. Use of damaged extension
cord will increase risk of electric shock or short
circuit resulting in fire.
6 ENGLISH