Urmet 1092 Manual De Usuario página 25

Option
AWB
ATW
AWC SET
MANUAL
INDOOR-OUTDOOR
Important note: you should preferably use the ATW option.
DAY/NIGHT – CAMERA OPERATION CHANGE ACCORDING TO VARIATION OF LIGHT PRESENT IN
The camera usually captures color images, but under poor light conditions it automatically switches its
operation mode from "color" to "black/white". In this way the captured image quality is optimized. Selecting
DAY/NIGHT, you can choose from the options EXT, AUTO (automatic), COLOR and B/W (black and
white).
EXT – (Default: Option highly recommended)
This option selects the automatic mode switching COLOR / BLACK&WHITE and the time in seconds of the
transition. The switching in black and white and the activation of the infrared lighting is synchronized by the
CDS.
D N (DELAY)
N D (DELAY)
RETURN
COLOR
With this option camera images are always in color mode and the camera does not switch in Night mode
(B/W). During the night or under conditions of poor illumination, with the IR illumination, images are in black
and white anyway.
B/W
With this option, camera images are always in black/white mode. Select B/W option to access the following
submenu:
BURST
IR SMART
IR PWM
RETURN
DS 1092-186
Value
Auto White Balance: allows an automatic white balancing
when color temperature range (color gamma) is
/
particularly wide.
Auto Tracking White Balance modes allow an automatic
/
adjustment based on surrounding environment detection
White balancing setting, to be used when a single
adjusting is preferred to automatic adjusting (constant
/
lighting condition). Press the menu button to activate this
function.
Manual adjustment of the colors red and blue. Choose
BLUE ÷ RED
among the values from 0 to 100.
Automatic adjustment based on surrounding environment
/
detection: installations INDOOR or OUTDOOR.
THE SCENE
D&N EXT
■■■■■■█■■■40
■■■■■■█■■■40
RET
D&N B&W
OFF
OFF
■■■■█■■■■■40
RET
Description
25