Sveon SNT1022 Manual De Usuario página 26

If you want to use RaUI application to setup your wireless network, right click over the RaUI icon again.
9. Network connection
9.1 Network connection using WZC (Windows Zero Connection)
- If you decided to use WZC to setup your wireless network connection, the following picture is shown:
- Press over the icon "1" to see
the available wireless networks.
- The following picture appears:
If your wireless network is protected
using a password, the following icon ap-
pears.
Select this network to connect.
- Click on "Connect".
SNT1022 User Manual
Index
1. Welcome
2. Features
3. System requirements
4. Technical specifications
5. Content
6. Hardware
7. Driver installation on PC
8. Device connection
8.1 RaUI setup
9. Network connection
9.1 Network connection using WZC
9.2 Network connection using RaUI utility
9.3 Network connection in AP-Mode (Ad Hoc)
9.4 Network connection in 5Ghz frequency
10. RaUI software control panel
10.1 Network
10.2 Profile
10.3 Advance
10.4 Statistics
10.5 WMM
10.6 SSO
10.7 CCX
10.8 Radio On/Off
10.9 About
11. MAC address specifications
Important information
26
English