Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5. If the connection is propperly done, the Modem o router will assign the setup data:
If your Modem or router is "N", this icon appears
Note: IP data IP 192.168.1.100 may change depending on the setup and the Modem/Router model.
9.3 AP-Mode Connection (Ad Hoc)
The AP-Mode function allows you to use your SNT1022 adaptor as a Router o Modem and setup a wireless network using
two adaptors.
AP-Mode connection under Windows XP
1. Right click over the following icon located in the Windows bar and select the option "Switch to AP Mode".
2. This window appears:
SNT1022 User Manual
Index
1. Welcome
2. Features
3. System requirements
4. Technical specifications
5. Content
6. Hardware
7. Driver installation on PC
8. Device connection
8.1 RaUI setup
9. Network connection
9.1 Network connection using WZC
9.2 Network connection using RaUI utility
9.3 Network connection in AP-Mode (Ad Hoc)
9.4 Network connection in 5Ghz frequency
10. RaUI software control panel
10.1 Network
10.2 Profile
10.3 Advance
10.4 Statistics
10.5 WMM
10.6 SSO
10.7 CCX
10.8 Radio On/Off
10.9 About
11. MAC address specifications
Important information
28
English
Publicidad
Tabla de contenido
