Sveon SNT1022 Manual De Usuario página 33

10.2 Profile
This section allows you to save different setting profiles and to activate them when you need it. For example, you can save
the network settings of your home or of your office and activate them when you are at home or at office without the nee-
ding to configure everything again.
SNT1022 allows you to add add different network profiles entering all the information in "Profiles" menu or from "Network
panel"
Add profiles in a manual way
1. Press "Profile" and select "Add".
2. In "Profile name" enter the name of the profile (For
example: "Office").
3. Press over "SSID" menu and choose your wire-
less network.
4. Press over the option "Auth.\ Encry"
5. Choose the Authentication mode and choose the
encryptation mode used by your Modem or router.
6. Enter your network password.
7. Press OK.
8. Select "Activate" to enable the profile.
SNT1022 User Manual
Index
1. Welcome
2. Features
3. System requirements
4. Technical specifications
5. Content
6. Hardware
7. Driver installation on PC
8. Device connection
8.1 RaUI setup
9. Network connection
9.1 Network connection using WZC
9.2 Network connection using RaUI utility
9.3 Network connection in AP-Mode (Ad Hoc)
9.4 Network connection in 5Ghz frequency
10. RaUI software control panel
10.1 Network
10.2 Profile
10.3 Advance
10.4 Statistics
10.5 WMM
10.6 SSO
10.7 CCX
10.8 Radio On/Off
10.9 About
11. MAC address specifications
Important information
33
English