GreenWorks ELITE ST-120-T Manual Del Propieratio página 14

ASSEMBLY
ATTACHING THE AUXILIARY HANDLE (See Figure 5.)
1. Loosen the two screws (1) in the handle with a philips screwdriver (not included) and
remove the screws from the handle.
2. Attach the auxiliary handle (2) and lower clamp (3) on the shaft.
3. Adjust handle up or down, if necessary, to desired operating position.
4. Insert and tighten the two screws so that the handle cannot be rotated on the shaft.
1
2
14
Fig.5.1
Fig.5.2
3