Service And Repairs - Hitachi Koki NV 65AH Manual De Instrucciones

Ocultar thumbs Ver también para NV 65AH:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Nail guide
Nail Stopper (A)
Nail Stopper (B)
4 Lubricate the feeding surfaces of the nose and the
nail guide after cleaning.
This promotes smooth operation and prevents
rust.
4. Inspecting the magazine
1 DISCONNECT AIR HOSE.
2 Clean the magazine. Remove dust or wooden tips
which may have accumulated in the magazine.
5. Storing
When not in use for an extended period, apply a thin
coat of the lubricant to the steel parts to avoid rust.
Do not store the Nailer in a cold weather environment.
Keep the Nailer in a warm area.
When not in use, the Nailer should be stored in a
warm and dry place.
Keep out of reach children.
6. WARNING LABEL
Change the WARNING LABEL if missing or damaged.
A new WARNING LABEL is available from a Hitachi
authorized service center.
7. Maintenance chart (See page 17)
8. Operator troubleshooting (See page 17)

SERVICE AND REPAIRS

Shaft
Feeder
Nose
All quality Nailers will eventually require servicing or
replacement of parts because of wear from normal use.
NOTE: Specifications are subject to change without any
Warning
Label
— 16 —
WARNING
Only service personnel trained by Hitachi,
distributor or employer shall repair the Nailer.
Use only parts supplied or recommended by
Hitachi for repair.
obligation on the part of HITACHI.

Publicidad

Tabla de contenido
loading

Tabla de contenido