Troubleshooting - DeWalt DCHT860 Manual De Instrucciones

In addition to the warranty, D WALT tools are covered by our:
e
1 year free serVICe
D WALT will maintain the tool and replace worn parts caused by
e
normal use, for free, any time during the first year after purchase.
D WaLT BaTTery PaCks
e
Product warranty voided if the battery pack is tampered with in any
way. D WALT is not responsible for any injury caused by tampering and
e
may prosecute warranty fraud to the fullest extent permitted by law.
90 Day Money BaCk GuaranTee
If you are not completely satisfied with the performance of your
D WALT Power Tool, Laser, or Nailer for any reason, you can return it
e
within 90 days from the date of purchase with a receipt for a full refund
– no questions asked.
LaTIn aMerICa: This warranty does not apply to products sold
in Latin America. For products sold in Latin America, see country
specific warranty information contained in the packaging, call the local
company or see website for warranty information.
free WarnInG LaBeL rePLaCeMenT: If your warning labels
become illegible or are missing, call 1-800-4-D
9258) for a free replacement.
DCHT860
22 in. (559mm) HEDGE TRIMMER
TYPE1 40V MAX
WARNING/AVERTISSEMENT/ADVERTENCIA
TO REDUCE THE RISK OF INJURY, USER MUST READ INSTRUCTION MANUAL.
USE PROPER EYE AND RESPIRATORY PROTECTION. AFIN DE RÉDUIRE LE RISQUE
DE BLESSURES, L'UTILISATEUR DOIT LIRE LE MODE D'EMPLOI. UTILISER UNE PROTECTION OCULAIRE ET
RESPIRATOIRE ADÉQUATE. PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL
DE INSTRUCCIONES. UTILICE PROTECCIÓN ADECUADA PARA LOS OJOS Y VÍAS RESPIRATORIAS.
DEWALT INDUSTRIAL TOOL CO., BALTIMORE, MD 21286 U.S.A.
FOR SERVICE INFORMATION, CALL 1-800-4-DEWALT www.DEWALT.com
WALT (1-800-433-
e
SER.
1550/min. 3100 CSPM
GARDENING
APPLIANCE
406A
MADE IN CHINA

TrouBLeSHooTinG

Problem Solution
Unit will not start. • Check battery installation.
• Check battery charging requirements.
• Check that lock off is fully pushed
Battery won't charge. • Insert battery into charger until red
• Plug charger into a working outlet. Refer
• Check current at receptacle by
• Check to see if receptacle is
• Move charger and appliance to a
Slow running, noisy, • Inspect for nicks and remove is possible.
or hot blades.
• Lubricate blades.
• Bring to a D
• Tighten bolts on the blade.
14
down prior to moving main trigger.
charging light illuminates. Charge up
to 8 hours if battery is totally drained.
to Important Charging notes for
more details.
plugging an appliance.
connected to a light switch which
turns power off when you turn out the
lights.
surrounding air temperature of above
40 °F (4.5 °C) or below 105 °F
(40.5 °C).
WALT factory service
e
center to straighten blade, blade
support, or teeth.