Bushnell TROPHY CAM HD ESSENTIAL Manual De Instrucciones página 20

Parameter
Interval
Sensor Level
20
Settings
(Bold=default)
10S (second)
default, with a
60M (minute)
to 3S (second)
range of settings
available.
(60M-1M are set
in one minute
increments,
59S-3S are set
in one second
increments)
Low, Normal,
High, Auto
Description
Selects the length of time that the
camera will "wait" until it responds to
any additional triggers from the PIR
after an animal is first detected and
remains within the sensor's range.
During this user set "ignore triggers"
interval, the camera will not capture
photos/videos. This prevents the card
from filling up with too many redundant
images. Settings begin with 10
second default when parameter is first
selected. Note: after setting down past
"3S", settings start over at "60M".
Selects the sensitivity of the PIR
sensor. The "High" setting will make
the camera more sensitive to infrared
(heat) and more easily triggered by
motion, and the "Low" setting makes it
less sensitive to heat and motion. The
High setting can be useful when the
ambient temperature is warm (making
it more difficult for the sensor to detect
animals), and the Low setting may help
in cold weather if the camera is being
triggered too often by anything warmer
than the surroundings. "Normal" is
for average or moderate conditions.
The default "Auto" setting will allow
the camera to determine the best
setting based on its current operating
temperature. This is an ideal setting
if the weather is expected to change
significantly during the period the
camera will be used.