Descargar Imprimir esta página

Bushnell TROPHY CAM HD ESSENTIAL Manual De Instrucciones página 30

Ocultar thumbs Ver también para TROPHY CAM HD ESSENTIAL:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

3. Make sure that the camera power switch is in the "On" position and
not in the "Off" or "Setup" modes.
4. Make sure that you are using a good quality SD card in your camera.
Bushnell recommends SanDisk ® SD Cards up to 32GB.
5. If the SD card has its write protect switch in the lock position, the
camera will not take images.
6. If you have used an SD card in another device before inserting it in
your Trophy Cam HD Essential, you might want to try formatting the
card using the "Format" parameter in Setup mode (make sure you have
backed up any important files first, as formatting will erase all previous
files). In some cases, other devices may change the formatting of the
SD card so that it will not work properly with the Trophy Cam HD
Essential.
Camera won't power up
1. Make sure that you have installed all eight batteries in the battery
compartment, filling battery spaces 1-8 with no "gaps".
Bushnell recommends using 8 Energizer ® Lithium AA batteries in
all Trophy Cam HD Essentials.
2. Make sure that the batteries are installed correctly, observing proper
polarity. Always place the negative (flat) end of each battery in contact
with the spring side of its slot inside the camera.
3. After moving the switch from "Off" to "Setup" or "On", make sure
that the switch is correctly in position to ensure the proper mode
(avoid positions "between" two modes).
4. Do not move the switch directly from "On" to "Setup"-always move
the switch all the way down to "Off" first, then back up to "Setup".
Still Photo and/or Video Quality Problems
1. Night photos or videos appear too dark
a. Check the battery indicator icon to see if battery power is full.
The flash will stop operating near the end of the battery life.
b. You will get the best results when the subject is within the
ideal flash range, no farther than 80' (24m) from the camera.
Subjects may appear too dark at greater distances.
c. Please note that when the Capture Number parameter is
set higher than "1 Photo", or with very short Interval settings,
some images may appear darker than others due to the quick
response and rapid retriggering of the camera, allowing less time
30

Publicidad

loading

Este manual también es adecuado para:

119836