Environmental Protection; Installation And Startup - Kärcher K 2 Full Control Manual Del Usuario

Environmental protection

The packaging material can be recy-
cled. Please arrange for the environ-
mentally appropriate disposal of the
packaging.
Old appliances contain valuable recy-
clable materials that should be recy-
cled properly. Please arrange for the
environmentally appropriate disposal
of the old devices.
Electrical and electronic devices often
contain components which could poten-
tially pose a danger to human health and
the environment if handled or disposed
of incorrectly. However, these compo-
nents are necessary for the proper oper-
ation of the device. Devices marked with
this symbol must not be disposed of with
regular household rubbish.
Cleaning operations which produce
oily waste water, e.g. engine washes,
underbody washes, may only be car-
ried out using washing stations
equipped with an oil separator.
Work with detergents must only be per-
formed on liquid-tight work surfaces
with a connection to the sewer system.
Do not let release detergent into wa-
ters or earth.

Installation and Startup

Illustrations on Page 3
 Illustration
Mount loose parts delivered with appli-
ance prior to start-up.
 Park the appliance on an even surface.
 Illustration
Pull out the clamp from the trigger gun
and plug the high-pressure hose into
the trigger gun.
Push the clamp in until it locks. Check
the secure connection by pulling on the
high-pressure hose.
 Illustration
ATTENTION
Impurities in the water can damage the
high-pressure pump and the accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
English 17