Snapper 2691552 Manual Del Operador página 11

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

b.
Slip plastic channel of grass bag over hooks on the
frame. See Figure 3-7.
B
Figure 3-7
2.
Follow steps below to attach grass catcher:
a.
Lift rear discharge door.
b.
Place grass catcher into the slots in the handle
brackets as shown in Figure 3-8. Release discharge
door so that it rests on the grass catcher.
Figure 3-8
To remove grass catcher, lift rear discharge door on the mower.
Lift grass catcher up and OFF the slots in the handle brackets.
Release rear discharge door to allow it to close rear opening of
mower.
A
B
A
B
Side Discharge Chute
Your mower is shipped as a mulcher. To convert to side discharge,
make sure grass catcher is OFF of the unit and rear discharge
door is closed.
1.
On the side of the mower, lift the side mulch plug. See
Figure 3-9.
Side Mulch
Plug
Figure 3-9
2.
Slide two hooks of side discharge chute under hinge pin on
mulch plug assembly. Lower the mulch plug.
NOTE: Do not remove side mulch plug at any time.
S
ection
1
2
2 — A
& S
-U
SSembly
et
p
11

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido