Bluetooth ® Pairing - Hama Soundcup-S Instrucciones De Uso

4.3 Audio playback via the included audio cable (3.5 mm jack)
• Ensure that the speaker is switched off.
• Connect your mobile terminal device (MP3 player, smartphone, etc.) and the AUX
input (2) of the speaker using the included 3.5 mm audio cable.
• Set the volume on your terminal device to a low level.
• Switch on the speakers as described in 4.1, Switching the product on and off.
The status LED (4) is now green.
• Start and control audio playback on the connected terminal device accordingly.
• Turn the rotary control to the left or right to increase or decrease the volume.
• Press the function button
Note
Please note that you cannot establish the Bluetooth
4.4 and 4.5 if an audio cable is connected.
4.4 Bluetooth
®
Note
• Check whether your mobile device (MP3 player, mobile phone, etc.) is
Bluetooth
capable.
®
• If not, you can only use the speaker for playback using the included audio cable.
• Note that the maximum range for Bluetooth
such as walls, people, etc.
• Make sure that your Bluetooth
activated.
• Make sure that the speaker is located within the Bluetooth
metres.
• Switch on the speakers as described in 4.1 Switching the product on and off.
• The status LED (4) starts to flash in blue. The speaker searches for a connection.
• Open the Bluetooth
Soundcup-S appears in the list of Bluetooth
• Select Hama Soundcup-S and wait until the speaker is listed as connected in
the Bluetooth
®
connection was successful.
• The status LED (4) now remains blue.
4
(1) to mute the speaker.
pairing
®
settings on your terminal device and wait until Hama
®
settings on your terminal device. An acoustic signal confirms that
is 10 metres without obstacles
®
capable terminal device is on and Bluetooth
devices found.
®
connection described under
®
range of max. 10
®
is
®