Skymsen ABSC Manual De Instrucciones página 11

PICTURE 07 PICTURE 08
3.3.2 Placing the rollers
The rollers must be mounted on the support rollers as described below:
- Place the rolls of support N ° 01 (Pic. 09) on a table.
- Single roll which has a flange and fit as Pic. 09.
- Each roll has its correct position in the roller support.
- Mount the roll with the flange in position as shown in Pic. 09.
- It is not possible to mount the flange roll in the roller position without the flange.
PICTURE 09
FLANGE
01
11