General Safety Practices; Basic Operation Practices - Skymsen ABSC Manual De Instrucciones

4. General Safety Practices

IMPORTANT
If any recommendation is not applicable to your equipment, please ignore it.
The following safety instructions are addressed to both the operator of the machine as
well as the person in charge of maintenance.
The machine has to be delivered only in perfect conditions of use by the Distributor to the
user. The user shall operate the machine only after being well acquainted with the safety
procedures described in the present manual. READ THIS MANUAL WITH ATTENTION.

4.1 Basic Operation Practices

4.1.1 Dangerous parts
Some areas of the electric device have parts that are connected or have parts connected
to high voltage. These parts when touched may cause severe electrical chocks or even be
fatal.
Never touch commands such as buttons, turning keys and knobs with wet hands, wearing
wet clothes and/or wet shoes. By not following these instructions operator could be
exposed to severe electrical shocks or even to a lethal situation.
4.1.2 Warnings
The operator has to be well familiar with the position of ON/OFF Switch to make sure the
Switch is easy to be reached when necessary.
Before any kind of maintenance, physically remove plug from the socket. Provide space for
a comfortable operation thus avoiding accidents. Water or oil spilled on the floor will turn
it slippery and dangerous. Make sure the floor is clean and dry.
Never use a manual command (switch, buttons, lever) unadvisedly. If any work is to be
made by two or more persons, coordination signs will have to be given for each operation
step. Every step of the operation shall be taken only if a sign has been made and responded.
4.1.3 Precautions
16