Koenic KSH 4220 WD Manual De Instrucciones página 11

Congratulations!
Thank you for your purchase of KOENIC product
Please read this manual carefully and keep it for
future reference.
Intended use
This product is only suitable for shaving dry or
wet beards, with or without shaving cream, as
well as for trimming beards and sideburns.
Any other use may result in damage to product
or injuries. This product is not intended for
commercial use. It is designed for household
use only.
The Imtron GmbH assumes no liability for damage
to the product, for property damage or for
personal injury due to careless or improper usage
of the product, or usage of the product which
does not meet the manufacturer's specified
purpose.
Before first time use
Remove the product and accessories carefully
from the original packaging. Inspect the delivery
contents for completeness and damages. Should
the delivery contents be incomplete or damaged,
contact your sales outlet immediately.
Note
• For first time use, charge the product for at
least 2 hours. The general charging time is
about 90 minutes which also depends on the
condition of the battery.
• When the battery is fully charged, the
product can be used for 60 minutes. The
time may vary (depending on the battery
condition).
Disposal
Do not dispose of this product as municipal
waste. Return it to a designated collection
point for the recycling of electrical and
electronic equipment. Contact your retailer
or local authorities for more information.
Please dispose of batteries in an
environmentally friendly manner Do not
put batteries into the household waste.
Please use the return and collection systems in
your community or contact the dealer where you
purchased the product.
_KSH4220WD_180803_V07_HR.indb 11
Content
1 x Shaver
1 x Charging power supply
1 x Cleaning brush
1 x Storage bag
1 x Replacement shaving head and 2 blade blocks
1 x User manual
Controls and Components
Protective cap
A
Shaving head
B
Shaving head release button, both sides
C
On/ off button
D
Display
E
Charging socket
F
Hair trimmer
G
Charging power supply with DC cable and plug
H
Cleaning brush
I
Storage bag
J
Spare parts
Shaving head with shear foil
K
Blade block (2x)
L
Technical Data
Shaver
Battery operated : 3.7 V
Rated input : 5 V
voltage/current
IP code : IPX5
Charging adaptor (HX-SV0500800)
Rated input : 100 - 240 V~, 50/60 Hz
Rated output : 5 V
IP code : IP44
Protection class : II
Battery
Re-chargeable : Li-Ion, 3.7 V
battery 500 mAh
English
, 800 mA
, 800 mA
11
3/8/18 5:12 pm