Koenic KSH 4220 WD Manual De Instrucciones página 12

Size - A6
English
Preparation
Insert the DC plug of the charging power
1
supply into the charging socket and plug the
charging power supply in a suitable power
outlet.
The symbol
2
and indicates that the battery is being
charged. The battery symbol
green when the battery is fully charged.
Charge the battery for at least 120 minutes
before first use. For standard charging,
the empty battery is fully charged after a
maximum charging time of 90 minutes, as
indicated by the green battery icon on the
display.
After completing the charging process,
remove the charging plug and unplug the
charging power supply from the socket.
Note
Ensure that the product is switched off before
charging.
LED indicator
LED-Color
Plug symbol,
red
Battery
symbol, green
Plug symbol,
red, flashing
Operation
Switch on the device
3
• Switch on the device by pressing the on/
off button.
- The display shows a green battery
symbol.
- When used in mains mode, the green
battery symbol and the red plug symbol
flash alternately.
• To switch off the device press the on/ off
button again.
- The battery symbol turns off.
12
_KSH4220WD_180803_V07_HR.indb 12
lights up red in the display
shines
Condition
During charging or mains
operated.
Charging completed or when
used cordless. Fully charged.
During operation, when the
battery level is less than 20%.
Foil shave
4
Note
Do not use the product if you have:
- skin lesions
- inflamed skin
- sunburn
- spots and blisters
Familiarisation:
After using the product you may have red
or irritated skin for a while. This is a normal
reaction because the skin has to first get
used to this kind of shave. Consult a doctor
if the redness or irritation continues for
longer than this period.
• Remove the protective cap.
• Switch on the device with the on/ off
button.
• When shaving, keep the device as
perpendicular as possible to the surface
of the skin.
• Tighten the skin with your free hand in
problematic areas, eg. on the cheeks, to
achieve a better result.
• Also shave against the beard growth
direction to remove stubble as best as
possible.
• Control shaving progress by touching your
skin with your free hand. If beard stubbles
are present repeat the process again and
again until the skin is smooth and free of
beard stubbles.
• Switch off the device with the on/ off
button after use.
Note
The beard should not be longer than a
few millimetres as longer hair will impair
the shaving. If the beard is too long, use
the hair trimmer to cut it before using the
actual razor.
3/8/18 5:12 pm