Esn Security Operating Procedure; About Esn; How To Operate The Esn (Key Cd) Security; How To Program The Key Cd - Eclipse CD3000 Manual Del Propietário

ESN security operating procedure

About ESN

This equipment incorporates ESN (Eclipse
Security Network). The ESN is a security system
which disables all the equipment functions when
the power is restored if the equipment is stolen
from the vehicle. Once the ESN is activated,
removing power to the equipment or vehicle will
activate the security feature. Setting or canceling
of the security feature can be done with a "Key
CD". It is necessary to register a music CD as the
"Key CD" in advance.
How to operate the ESN (Key
CD) security

How to program the Key CD

Check that the equipment is in
1
standby.
Press and hold the [FUNC] button,
2
then the button [6], and hold both
for more than one second.
A [SEC] message appears, in two
seconds it will change to [DISC].
ATTENTION
• If a CD has already been inserted, a [SEC]
message appears, and then the front panel
opens and the CD is ejected.
• If a security is activated, programing the
Key CD is not available.
3
Press the [CD
The front panel opens; The CD3000 is
now ready for your Key CD in the CD
slot.
] button.

ESN security operating procedure

4 Insert the CD into the slot.
A [SEC] message appears, then the
Key CD is ejected.
5
Press the [CD
The front panel closes.
ATTENTION
• If there is a problem with the inserted CD,
an [ERR] message will appear for two
seconds and the CD will be ejected.
Reinsert the ejected CD.
• If a CD causes the [ERR] message to
appear twice in a row, a [CHANGE]
message will appear for two seconds. Try
another CD.
• Copy Protected CD and MP3/WMA CD-ROM
cannot be programed for Key CD security.
• The Security indicator will flash whenever
the vehicle's ignition is switched off.

How to cancel the Key CD

Check that the equipment is in
1
standby.
Press and hold the [FUNC] button,
2
then button [6], and hold both for
more than one second.
A [SEC] message appears, then in two
seconds it will change to [DISC].
3
Press the [CD
The front panel opens; The CD3000 is
now ready for your Key CD in the CD
slot.
] button.
] button.
29
VI
VII