Esoteric Grandioso P1x Manual Del Usuario página 13

E
DC power input and output connectors
Use the included DC (direct current) power cords to connect the
DC power input connectors of the main unit with the DC power
output connectors of the power supply unit .
DC OUT 1 e DC IN 1
DC OUT 2 e DC IN 2
o The DC power cords have arrows printed on them . Connect
them so that the arrows point in the direction shown in the
illustration on page 12 .
Check the orientation of the pins and the arrows of each
DC power cord and hold it by its plug . Align the marks on
the plug and the connector and push it in completely until
it clicks into place . When disconnecting, hold the ring and
pull it directly out . When connecting or disconnecting power
cords, do not angle or wiggle the plugs .
o Be sure that the units are off before connecting or discon-
necting a DC power cord .
o Be careful not to pinch your fingers in the ring when con-
necting or disconnecting a DC power cord .
Connector
Align the marks when connecting .
When disconnecting, hold the ring
and pull it directly out .
Plug
V
Never connect this to a P-0, P-01, Grandioso P1 or
Grandioso C1 unit.
Doing so could cause damage.
F
LED brightness adjustment knob
Turn to adjust the brightness of the power indicator .
G
AC power inlet (~IN)
Connect the included AC power cord to this AC inlet . After com-
pleting all other connections, plug the power plug into a power
outlet .
V
Use only a genuine ESOTERIC power cord. Use of
other power cords could result in fire or electric
shock.
V
Disconnect the power plug from the outlet if you
will not use the Grandioso P1X for a long time.
13