Setting mode
1
Press the MENU button repeatedly to select the
item to change.
Each time you press the MENU button, the item shown on the
display changes as follows .
OUT>
c
ESLINK>
c
CLK>
c
DAC>
o If you do nothing for ten or more seconds, setting mode will
end and ordinary display will resume .
o Press the stop (8) button to end setting mode .
o Settings can only be changed when stopped . If the unit is
playing back, press the stop (8) button to stop it before con-
ducting these operations .
24
APS>
3
LAYER>
3
DPaOFF>
2
Use the .// buttons to change the settings.
For information about the settings, see pages 25–27 .
If you do nothing for ten or more seconds or press the stop (8)
button once, setting mode will end and ordinary display will
resume .
o You can also use the remote control skip (.//) buttons
for these operations .
o Settings are retained even if the power plug is disconnected .