Before use
Included accessories
Check to be sure the box includes all the supplied accessories shown
below . Please contact the store where you purchased this product if
any of these accessories are missing or have been damaged during
transportation .
Power cord × 1
DC power connection cords × 2
HDMI cable × 1
Remote control (RC-1315) × 1
Batteries for remote control (AAA) × 2
Felt pads × 8
Owner's manual (this document) × 1
Warranty card × 1
Note about pinpoint feet
High-precision metal pinpoint feet are attached securely to the bot-
tom plates of the main and power supply units .
Chassis
Foot-stand (metal)
The stands for these pinpoint feet are loose, but the stands support
the units when they are placed, effectively dispersing vibrations .
o Apply the included felt pads to the bottoms of the foot-stands to
avoid scratching the surface where the units are placed .
Maintenance
Use a soft dry cloth to wipe the surfaces of the units clean .
For stubborn smudges, use a damp cloth that has been thoroughly
wrung out to remove excess moisture .
o Never spray liquid directly on these units .
o Do not wipe with chemical cleaning cloths, thinner or other
chemical agents . Doing so could damage the surfaces of the units .
o Avoid allowing rubber or plastic materials to touch the units for
long periods of time, because they could damage the cabinets .
V
For safety, disconnect the power plug from the
outlet before cleaning.
Pinpoint foot (metal)
Screws that attach
foot-stand
7