Auto Flash Without Red-Eye Reduction; Fill Flash - Kodak ADVANTIX T500 Manual De Instrucciones

1. Press the /
ON OFF BUTTON
lens cover and to turn the camera ON.
2. Press the
SELECT
repeatedly until the
(26) appears on the
INDICATOR
(11).
LCD PANEL
• Disregard step 2 if the default setting is
already set for red-eye reduction.
3. Frame your picture in the
(10).
EYEPIECE
4. Press the
SHUTTER BUTTON
the picture.
Auto flash without
red-eye reduction
Use this mode for taking pictures without
people. You can change the default setting to
auto flash without red-eye reduction by
following the instructions below:
1. Press the /
ON OFF BUTTON
lens cover and to turn the camera ON.
2. Press the
SELECT
repeatedly until the
(32) appears on the
INDICATOR
(11).
LCD PANEL
12
(2) to open the
/ (20)
FLASH BUTTON
- -
RED EYE REDUCTION
VIEWFINDER
(1) to take
(2) to open the
/ (20)
FLASH BUTTON
-
AUTO FLASH
3. Frame your picture in the
(10).
EYEPIECE
4. Press the
SHUTTER BUTTON
the picture.
• The camera will now default to the auto-
flash mode without red-eye reduction.
FILL

Fill flash

When bright light indoors or outdoors comes
from behind the subject (backlighting), dark
shadows (especially on faces) may occur.
Use fill flash to lighten these shadows.
1. Press the /
ON OFF BUTTON
lens cover and to turn the camera ON.
2. Press the
SELECT
repeatedly until the
(30) appears on the
INDICATOR
(11).
LCD PANEL
3. Frame your subject within the
(10).
EYEPIECE
4. Partially depress the
When the
FLASH
glows green, fully depress the shutter
button to take the picture.
VIEWFINDER
(1) to take
(2) to open the
/ (20)
FLASH BUTTON
-
FILL FLASH
VIEWFINDER
SHUTTER BUTTON
/ -
CAMERA READY LAMP
(1).
(9)