Troubleshooting - Kodak ADVANTIX T500 Manual De Instrucciones

TROUBLESHOOTING

What happened
Camera will
not operate
Film does not
advance or rewind
LCD panel is blank
Flash/camera ready
lamp "blinks" red
Flash/camera ready
lamp "blinks" green
Flash/camera ready
lamp glows red
Film-presence
indicator "blinks" on
LCD panel
Film door does
not open
Probable cause
Battery weak, dead, missing,
or improperly loaded
Battery weak, dead, missing,
or improperly loaded
Battery weak, dead, missing,
or improperly loaded
Camera in sleep mode
Camera turned off
Flash not fully charged
Insufficient light
Camera movement
Subject too close to camera
Loaded exposed ( ), partially
exposed ( ), or processed film ( )
into the camera
Film cassette loaded in
film chamber
Solution
Replace or reload
the battery
Replace or reload
the battery
Replace or reload
the battery
Press mode-selector
button or turn camera off
and then back on
Turn ON/OFF button ON
Wait for lamp to
glow green
Use fill-flash feature and
recompose picture
Hold camera steady
Move back and
recompose picture
Load only new film ( )
into the camera
Press the rewind button
(see Manual rewind) or
continue taking pictures
19