Fein AFSC18Q Manual De Instrucciones página 9

OBJ_BUCH-0000000357-001.book Page 9 Monday, January 28, 2019 11:44 AM
Intended use of the power tool:
Hand-guided oscillator for use without water
supply in weather-protected environments
using the application tools and accessories
recommended by FEIN.
Construction
Symbols.
Symbol, character Explanation
Observe the instructions in the text or graphic opposite!
General prohibition sign. This action is prohibited.
Make sure to read the enclosed documents such as the Instruction Man-
ual and the General Safety Instructions.
Do not touch the saw blade. Danger of sharp application tools moving
back and forth.
Warning against sharp edges of application tools, such as the cutting
edges of the cutter blades.
Before commencing this working step, remove the battery from the
power tool. Otherwise there may be danger of injury caused by unin-
tentional starting of the power tool.
Use eye protection during operation.
Wear hearing protection while working.
Use a dust mask during operation.
Use protective gloves during operation.
Switching on
Switching off
Do not charge damaged batteries.
Observe the notes in the text aside!
Confirms the conformity of the power tool with the guidelines of the
European Community.
This symbol confirms the certification of this product for the USA and
Canada.
– for sawing wood (max. 78 mm), plastic,
glass-fibre reinforced plastics (GFRP, CFK)
and for sawing sheet metal (max. 1 mm)
– for removing tile joints and rasping or
scraping off tile grout or carpet remainders
– for sanding or rasping of smaller surfaces
en
9