Use; Identification; Noise Level; Technical Specifications - breviglieri Super Master 160 Instrucciones De Empleo Y Mantenimiento

1.3.3 USE

The SUPER MASTER Cutter has been designed for agricultural or semi-professional uses, ground care, for work on the sides
and banks of rivers and ditches and/or for cutting operations on the field where it can be used to shred grass and woody
plants. One single operator seated on the tractor is able to carry out the various operations required. The machine has been
designed for use on agricultural-forestall land. It is therefore not suitable for excavation work of any kind. The cutting height
should be chosen with care to prevent the cutting tools from hitting against stones or other objects that could damage the
machine itself. Any other use of the machine differing from the explanations given in this manual relieves for Manufacturer
from all and every liability for deriving damage to persons, animals or property.

1.4 IDENTIFICATION

Each machine is provided with an identification plate (20 Fig. 1) with the following data:
▪ «CE» marking
▪ Manufacturer's name and address
▪ A) Machine model
▪ B) Machine version
C) Serial number
▪
▪ D) Weight (in kg)
▪ E) Year of manufacture
The data on the identification plate of the machine should be copied into the last page of this manual and must always be stated
when spare parts and/or assistance are required.
Standard machine supply includes:
▪ Driveline
Operation and maintenance manual for the machine
▪
▪ «CE» declaration of conformity

1.5 NOISE LEVEL

The noise level (overhead noise) has been measured in compliance with the current laws, with the following results:
▪ Acoustic pressure LpAm (A)
▪ Acoustic power LwA (A)
The operator is advised to wear adequate ear muffs as personal protective equipment to prevent damage to his hearing during

1.6 TECHNICAL SPECIFICATIONS

Model Working
width
Super Master 160
Super Master 180
Super Master 200

SECTION 2

General safety regulations

2.1 SAFETY NOTES

The user must inform his personnel about the risks deriving from accidents, about the safety devices installed to safeguard the
operator and about the general accident-preventing regulations established by the Directives and by the laws in force in the country
.................................................................................................................................... dB 84
.......................................................................................................................................... dB 99
daily work with the machine.
Weight Power required
kg
cm kg HP
162 590 40-70
181 620 50-80
200 690 60-90
super master
CAUTION
kW Hammers
29-52
37-59
44-66
- 22 -
N° cutting tools
Knives
14 42
16 48
18 54
Cutting height
cm
2-7
2-7
2-7