Publicidad
Idiomas disponibles
Idiomas disponibles
DIMENSIONS
Model
120
t
sr
- 155
120
t
sr
- 180
120
t
sr
- 200
120
t
sr
- 220
120
t
sr
- 250
120
t
sr
- 280
120
t
sr
- 300
1.3.1 DESCRIPTION
120
The
t
sr
Cutter mainly consists of a metal structure that includes the central linkage with three-point hitches (2 Fig. 1) and a
rotor with knives (13-14 Fig. 1) situated in the lower part, all of which is driven by a belt transmission installed at the side (7 Fig. 1).
The power that drives the machine is transmitted by the tractor through a driveline (with CE marking) which meshes in a central
position with the PTO (10 Fig. 1) of the overdrive unit (5 Fig. 1) following which it is transmitted to the bladed rotor by means of
the side transmission belt (7 Fig. 1). Various different types of cutter can be mounted:
▪
universal knives (14 Fig. 1) for cutting grass and the stubble of light crops such as: barley, oats, wheat, etc.
▪
hammers (13 Fig. 1) for cutting more consistent vegetation, such as grass and branches up to 2-3 inch in diameter, etc.
Thanks to its high speed, the rotor is able to accurately shred the plants with which it comes into contact, allowing the vegetation
to easily convert into fertilizing humus. The mechanical shredding action produced by the machine improves the natural fertility
of the soil and thus reduces the amount of chemical fertilizer required.
1.3.2 USE
120
t
sr
The
Cutter must only be used for agricultural purposes, ground care and/or for cutting operations on the field
where it can be used to shred grass and woody plants. The machine has been designed for use on farming-forestal land. It is
therefore not suitable for excavation work of any kind. The cutting height should be chosen with care to prevent the cutting
tools from hitting against stones or other objects that could damage the machine itself. One single operator seated on the
tractor is able to carry out the various operations required. Any other use of the machine differing from the explanations
given in this manual relieves for Manufacturer from all and every liability for deriving damage to persons, animals or property.
1.4 IDENTIFICATION
Each machine is provided with an identification plate (16 Fig. 1) with the following data:
▪
«CE» marking
▪
Manufacturer's name and address
▪
A) Machine model
▪
B) Machine version
A
B
in
in
68.5
58.27
78.35
71.65
85.43
78.74
92.91
86.22
108.66
98.03
115.75
109.1
124.01
114.17
Fig.2
C
in
44.49
- 23 -
turbo t 120 sr
D
in
43.7
Publicidad
Capítulos
