Stopping The Machine; Parking; Eliminating Of The Machine - breviglieri b25f Serie Instrucciones De Empleo Y Mantenimiento

Proceed in the following way to replace the tools:
▪
Park the tractor on a flat surface with the machine hitched, then raise the machine with the power lift
▪
Insert two strong bearing stands at the sides of the machine to protect yourself should it fall
▪
Lower the machine on to the stands, turn off the tractor engine and apply the parking brake

4.6 STOPPING THE MACHINE

At the end of the job, the operator must:
▪
Disengage the tractor PTO
▪
Lower the machine to the ground
▪
Stop the tractor and engage the parking brake
▪
Make sure that all parts of the machine have come to a standstill
Only after the above mentioned operations have been carried out may the operator leave the tractor unattended.

4.6.1 PARKING

To park the machine and unhitch it from the tractor, the operator must:
▪
Make sure that no one is standing or crossing the place where the machine will be parked
▪
Make sure that the place in which the machine is to be parked is suitable, flat and uncluttered
▪
Drive to the area where the machine is to be unhitched
▪
Brake the tractor
▪
Lower the bearing stands
▪
Completely lower the machine to the ground
▪
Stop the tractor and engage the parking brake
▪
Disconnect the quick couplings
▪
Remove the driveline from the tractor's PTO and rest it on its bracket
▪
Disconnect the top link rod
▪
Disconnect the power lift links
▪
Switch on the tractor engine and move away
▪
Dry
▪
Sheltered from adverse weather conditions
▪
Guarded or locked up to prevent the machine from being accessed by animals, children or persons who are not trained
to use it
If the machine is to remain idle for a long period of time, lubricate the parts subject to wear and store it in a dry, sheltered
place, covered with a plastic sheet. This will ensure that the machine is in an ideal condition when required again.

4.6.2 ELIMINATING OF THE MACHINE

At the end of the operating life of the machine (or when it becomesobsolete), before carrying it in an authorized center, to make
surethat not there is oil in multiplying or in the hydraulic system (incase present), to the aim to avoid highly polluting dispersions
forthe atmosphere. Is necessary to inquire itself near the competentlocal authorities by the procedure to follow, always in the
respectof the national laws.
25
b
WARNING
The place in which the machine is parked must be:
CAUTION
- 29 -
f
macchine agricole