ROBLIN ESCALE Manual De Instrucciones página 11

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
4
OPERATION
Button
Function
Turns the suction motor on and off at the last
A
speed used.
Decrease the working speed.
B
Turns off the engine (and deactivates the
delayed shutdown function, if it is active).
Increase the working speed.
C
Activates intensive speed from any other
D
speed even with the motor off. This speed is
timed to run for 10 minutes, after which the
system returns to the previous speed. Suitable
to deal with maximum cooking fumes.
Activates the motor at a speed that allows
E
extraction of 100m3 / h for 10 minutes every
hour. After 24 hours, this function stops.
When the filter alarm is on, press the
button for approximately 3 seconds to
reset the alarm. These signs are visible only
when the engine is off.
Activates automatic shutdown after 30'. Suit-
F
able to complete elimination of residual
odours. Can be activated from any position,
and is turned off by pressing the button or
switching the motor off.
Turns the main lighting system on and off.
G
Decreases or increases the brightness
H
by a long press.
A
B
C
D
Control panel
E
F
G
H
Display
Displays the speed set
Reduces the speed used.
Hood off and on: press C while turning the
hood on, then 2 lines scroll on the display,
release the button: the configuration is
possible for 3s. Configure the function with
a short press on the key C :
the function is active when EF flashes twice
on the display
the function is deactivated when EF flashes
1 time on the display
Displays HI and the bottom right hand spot
flashes once a second.
Displays 24 and the bottom right hand spot
flashes, while the motor is turned on.On
completing the procedure the previous
indicator is turned off:
FF ou FG
indicates that the metal
grease filters
need washing. The alarm is triggered
after the Hood has been in operation
for 100 hours.
EF indicates that the activated charcoal
filter
needs
changing
metal
grease
washing.
The alarm is triggered
after the Hood has been in operation
for 200 hours.
These operations are only possible when
the motor and the lighting is turned off.
Alternately displays the working speed and
the time remaining before the hood turns
off. The bottom right hand spot flashes.
GB
and
the
filters
need
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hotte murale

Tabla de contenido