Key To Symbols - Imetec 7789 Instrucciones De Uso

technical service centre, so as to prevent all risks.
• The electrical safety of this appliance is only guaranteed when it
is connected correctly to an effective earthing system as required
by applicable electrical safety standards. This important safety
requirement must be verified before connecting the appliance to the
mains supply. If in doubt request a thorough check of the system by
a qualified technician.
• The motor body of this appliance shall not come into contact with
water, other liquids, spray, steam. Refer to the specific paragraph in
this manual for all cleaning and maintenance procedures.
• DO NOT use this appliance near a washbasin or a sink filled with
water. During use the appliance must be placed in such a way that it
cannot fall in the washbasin or the sink.
• This appliance must be placed on a flat, stable surface.
• See the external packaging for the characteristics of the appliance.
• Use the appliance only with the supplied accessories that are an
essential part of the appliance.
• This appliance is not intended to be operated by means of an external
timer or separate remote-control system or any other similar system.
• DO NOT use near a hob. The supply cord shall not come into
contact with hot, incandescent surfaces, open flames, pots and other
utensils.
• DO NOT leave food in contact with the appliance for any longer
than is necessary for preparation.
WARNING! Take care when handling the cutting blades,
emptying the jug and during cleaning.
WARNING! This appliance is not intended to be use with
food at temperature over 40 °C.
• Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
Caution/Warning/Danger
Prohibition

KEY TO SYMBOLS

P
Class II appliance
Pulse
EN
11