Candy CBWMS 914TWH-S Manual De Instrucciones página 67

SMART Fi+
This appliance is equipped with SMART Fi+
technology that allows you to control it
remotely via App, thanks to Wi-Fi function.
MACHINE ENROLLMENT (ON APP)
l
Connect the appliance to the power
supply.
We suggest that the Wi-Fi enrolment
procedure is
positioning the appliance into the
aperture.
l
Download the Candy simply-Fi App on
your device.
The Candy simply-Fi App is available
for devices running both Android and
iOS, both for
smartphones.
Get all the details of the SMART Fi+
functions by browsing the App in
DEMO mode.
l
Open the App, create the user profile and
enroll the appliance
instructions on the device display or the
"Quick Guide" attached on the machine.
Using an Android
equipped with NFC technology (Near
Field Communication), the enrollment
process is simplified (Easy Enrollment);
in this case, follow the instructions on
the phone display, PLACE AND KEEP
IT NEAR the SMART Fi+ logo on the
machine dashboard, when requested
to do so by the App.
NOTES:
Place your smartphone so that the
NFC antenna on its back matches
the position of the SMART Fi+ logo
on the appliance.
completed before
tablets and for
following the
smartphone
If you do not know the position of
your NFC antenna, slightly move the
smartphone in a circular motion over
the SMART Fi+ logo until the App
confirms the connection. In order for
the data transfer to be successful, it is
essential TO KEEP THE SMARTPHONE
ON THE DASHBOARD DURING THESE
THE FEW
PROCEDURE; a
device will inform about the correct
outcome of the operation and advise
you when it is possible to move the
smartphone away.
Thick cases or metallic stickers on
your smartphone
prevent the transmission of data
between machine and telephone. If
necessary, remove them.
The replacement of some components
of the smartphone (e.g. back cover,
battery, etc...) with non-original ones,
could result in the NFC antenna removal.
ENABLE REMOTE CONTROL (VIA APP)
After the machine enrollment, every time
you want to manage it remotely through the
App, firstly you have to load the laundry, the
detergent, close the door and select the
SMART FI+ position on the machine. From
that moment on you can manage it through
the App commands.
67
SECONDS OF
message on
could affect or
THE
the