Battery Replacement - Tripp-Lite SmartOnline Manual Del Propietário

5. Battery Replacement

Under normal conditions, the original batteries in the UPS system will last several years. The batteries are
designed for hot-swap replacement (i.e. replacement while the UPS system is in ON mode), but some
qualified service personnel may wish to put the UPS system in OFF mode and disconnect equipment
before proceeding.
Battery Warnings
• Caution: There are no user-serviceable parts inside the UPS system. Battery service or replacement must be
performed or supervised by qualified service personnel familiar with batteries and the required precautions.
• Caution: When replacing batteries, replace only with the same type and number of batteries.
• Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe proper
precautions. Do not dispose of the batteries in a fire. Do not open the UPS or batteries. Do not short or
bridge the battery terminals with any object. Unplug and turn off the UPS before performing battery
replacement. Use tools with insulated handles. There are no user-serviceable parts inside the UPS. Battery
replacement should be performed only by authorized service personnel using the same number and type
of batteries (Sealed Lead-Acid). The batteries are recyclable. Refer to your local codes for disposal
requirements or visit www.tripplite.com/UPSbatteryrecycling for recycling information. Tripp Lite offers
a complete line of UPS System Replacement Battery Cartridges (R.B.C.).Visit Tripp Lite on the Web at
www.tripplite.com/support/battery/index.cfm to locate the specific replacement battery for your UPS.
201102140 932835.indb 14
14
3/29/2011 4:50:22 PM