Set The Clock; Define The Area To Be Vacuumed; Use; Switching On And Off - Miele Scout RX1 / 1115 Instrucciones De Manejo

en
Rechargeable battery status
indicator in the display
red charged capacity
approx. 0% - 20%
orange charged capacity
approx. 20% - 50%
green charged capacity
approx. 50% - 100%
Set the clock (dia. 12)
Use the remote control to set the clock.
^ Press the Clock button for three
seconds.
The hour indicator will flash in the clock
display on the robot vacuum cleaner.
^ Press the + or - direction button to set
the current hour.
^ Press the OK button to confirm your
selection.
The minutes indicator will flash in the
clock display on the robot vacuum
cleaner.
^ Press the + or - direction button to set
the current minutes.
^ Press the OK button to confirm your
selection.
If you want to alter the time of day,
proceed as described above.
40

Define the area to be vacuumed

(dia. 13)
,
The robot vacuum cleaner is
88 mm high. Any items which are to
be vacuumed under should have a
minimum clearance of 90 mm.
You can define any areas which the
robot vacuum cleaner should not have
access to.
^ Place the magnetic strip supplied
with the groove facing downwards on
the floor.
The robot vacuum cleaner will not cross
over the magnetic strip.
Adhesive strips are supplied for
permanent fixing.
Additional magnetic strips are available
to order from Miele or online at
www.miele-shop.com.

Use

,
Always watch the robot vacuum
cleaner when it is vacuuming new
surroundings for the first time. This
way you will be able to detect and
remove any problematic obstacles
or define the area they are in with
the magnetic strip.

Switching on and off

^ Press the Power button on the
remote control.
The display will be activated.