Amana ACD10JE Manual De Uso página 8

2. Place the window lock bracket as shown. Use a 1⁄8" drill bit to
drill a starter hole through the hole in the window lock bracket
and into the upper window.
3. Attach the window lock bracket to the upper window with one
31⁄32" screw to secure the window in place.
Install Drain Tube
1. The condensate water may overflow the base pan under the
circumstances of high humidity. You must install the drain tube
before using the unit and adjust the direction of the drain tube
to make it align with the hole in rear of the unit
2. Insert the drain tube into the hole and rotate by 90 degree.
To drain the excess water to the proper place,connect a
drainpipe to the drain tube.When inserting the drain tube in
the hole or connecting the drainpipe with the drain tube, keep
your body away from the fins to avoid any injury..
8
Put unit back to the cabinet
Find someone to help you help you to do this step.
Reinstall front panel assembly and inlet grille.
Refasten the screws at each side of cabinet
1. Plug into a grounded 3 prong outlet.
2. Press RESET on the power supply cord. See "Electrical
Requirements."