Air Conditioner Use; Starting Your Air Conditioner - Amana ACD10JE Manual De Uso

Acondicionador de aire para habitación
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating your air conditioner properly helps you to obtain the
best possible results.
This section explains proper air conditioner operation.
IMPORTANT:
If you turn off the air conditioner, wait at least 3 minutes before
turning it back on. This keeps the air conditioner from blowing a
fuse or tripping a circuit breaker.
1. Remove the clear plastic film from the control panel.
2. Press POWER to turn on the air conditioner. The Power
indicator light will turn on.
NOTE: When the air conditioner is plugged in, the LED display
will show "88" for 3 seconds. After the air conditioner is turned
on for the first time, the display will show the current room
temperature and the fan is set to Low speed.
3. Select mode. See "Mode."
4. Select fan speed. See "Fan Speed."
5. Set temperature. See "Temperature."
Mode
1. Press MODE until you see the indicator light glow for the
desired setting.
2. Choose Fan, Cool, Energy Saver or Dehum.
Fan—Only the fan runs. Press SPEED to select High, Med
or Low fan speed. The display shows the current room
temperature.
Cool—Cools the room. Press SPEED to select High, Med or
Low fan speed. Press the TEMP/TIME up or down
arrow button to adjust the temperature.

AIR CONDITIONER USE

Do not try to operate your air conditioner in the Cool mode when
outside temperature is below 61°F (16°C). The inside evaporator
coil will freeze up, and the air conditioner will not operate
properly.

Starting Your Air Conditioner

NOTE:
Fan Speed
1. Press FAN SPEED until you see the indicator light glow for
2. Choose High, Med or Low.
Energy Saver—Fan runs only when cooling is needed. Press
SPEED to select High, Med or Low fan speed.
Because the fan does not circulate the room air continuously,
less energy is used, but the room air is not circulated as often.
Dehum—Dries the room. The air conditioner automatically
selects the temperature. Fan runs on Low speed only.
Dehum mode should not be used to cool the room.
In Dehum mode,Please do not operate the speed button.
the desired setting.
■ High—for maximum cooling
■ Med—for normal cooling
■ Low—for minimum cooling
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Acd12jeAcs12ke

Tabla de contenido