Symbols; Cleaning Device - Ca-Mi NEW ASKIR 30 Manual De Instrucciones

Hz
IP21
Use a soft dry cloth with not – abrasive and not – solvent detergents. To clean the device external parts always use a cotton cloth
dampened with detergent. Don't use abrasive or solvent detergents.
PARTICULAR CARE SHOULD BE TAKEN TO ENSURE THAT THE INTERNAL PARTS OF THE EQUIPMENT DO
NOT GET IN TOUCH WITH LIQUIDS. NEVER CLEAN THE EQUIPMENT WITH WATER.
During all clearing operations use protection gloves and apron (if need be, also wear a face mask and glasses) to avoid getting in
contact with contaminating substances (after each utilization cycle of the machine).
~
I
0

SYMBOLS

Class 2 isolation equipment
CE marking in conformity with EC directive 93/42/CEE and subsequent
General warnings and/or specifications
Consult the instruction manual
Manufacturer: CA-MI S.r.l.
Via Ugo La Malfa nr.13 – Frazione Pilastro
43013 Langhirano (PR) Italia
Applied Part type BF (suction probe)
Conservation temperature: - 25 ÷ 70° C
Degree of protection an electrical device provides in the case of
accidental or intentional contact with the human body or with objects,
and protection in the case of contact with water.
1st DIGIT
PENETRATION OF SOLIDS
Protected against solids having a
dimension greater than Ø 12mm

CLEANING DEVICE

14
changes
Keep in a cool, dry place
Fuse
Atmospheric Pressure
Alternate current
Mains frequency
ON
OFF
Batch production
Serial number
Model / Ref number
2nd DIGIT
PENETRATION OF LIQUIDS
Protected against the vertical
flow of drops of water
EN