Crest Audio Pro-LITE 5.0 Manual Del Propietário página 21

Pro-LITE 5.0 / 7.5
®
Power Amplifiers
Congratulations on your purchase of the Crest
under rigorous use, the groundbreaking Pro-LITE
increasing output power, reliability and thermal efficiency. Pro-LITE
switch-mode power supply and a highspeed class D topology, that yields the highest audio resolution and efficiency available. This
revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Crest
and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult
loads and power conditions. In other words, you get an amazingly powerful and efficient amplifier that won't break your budget
or your back! The ACL (Automatic Clip Limiting) circuitry ensures trouble-free operation into loads as low as 2 ohms. ACL
™
protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The Pro-LITE's high-efficiency
design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to cool. For your safety,
read the important precautions section, as well as input, output and power connection instructions.
Although the Pro-LITE amplifier is simple to operate and housed in an ultra-strong, ultra-lightweight chassis, improper use can be
®
dangerous. This amplifier is very high-powered and can put out high voltages and sizable currents at frequencies up to 30 kHz. Always
use safe operating techniques when operating this amplifier.
Before you apply power to your amplifier, it is very important to ensure that the product has the proper AC line voltage supplied.
You can find the proper voltage for your amp printed next to the IEC line (power) cord on the rear panel of the unit. Each
product feature is numbered. Refer to the front-panel diagram in this manual to locate the particular features next to its number.
Please read this guide carefully to ensure your personal safety as well as the safety of your
amplifier.
VENTILATION: For proper ventilation, allow 12" clearance from nearest combustible surface.
Make sure that vents are not blocked and air can flow freely through the unit.
Pro-LITE Features:
®
• 2 channel independent crossovers
• ACL ™ protection
• Revolutionary class D topology
• Detented input controls
• Combination XLR 1/4" inputs
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used
in accordance with the instructions may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or and experienced radio/TV technician for help.
ENGLISH
Pro-LITE power amplifier! Designed for years of reliable, flawless operation
® ®
series utilizes an advanced design that dramatically reduces weight, while
™
Series amplifiers are also designed with a resonant
®
• 4 pole twist lock output connectors
• Ultra-light weight
• Individual signal pass 1/4" jacks on each channel
• LED illuminated
• Standby, LED power present indication
21
is famous, in an extremely efficient
®
™