Crest Audio Pro-LITE 5.0 Manual Del Propietário página 30

Output Polarity
The output polarity can be inverted on either channel. Select
Normal or Invert in the polarity screen. If you create a crossover
with 12dB per octave filters, the high frequency output would
likely need to be inverted to maintain the proper phase
relationship at the crossover frequency. Temporarily inverting the
polarity of one channel of a multi-way system can also aid in the
setting of the delay for driver alignment. You can adjust the delay
for cancellation at the crossover frequency. Remember to switch
the polarity back to Normal when complete.
To return to the Main Menu, select Discard and Exit or Save and
Exit.
Equalization
The Pro-LITE ® DSP provides five bands of parametric EQ, Waves
Bypass
EQ bypass screen
Set Channel EQ
The first screen in the EQ Sub Menu is the bypass screen. The channels can be bypassed independently or both A&B can be bypassed
together. Press the encoder until the cursor is under the desired parameter to change and rotate the encoder to change the bypass
mode. Press the cursor to return it to the upper left corner when done so you can scroll to other screens.
MaxxBass
®
The MaxxBass enhancement system interacts with the
®
high-pass filter for each channel to produce bass energy in a
frequency range the loudspeaker can handle. The higher the
MaxxBass number, the more the bass is enhanced.
®
Output Polarity screen
® Maxx Bass ® enhancement and horn EQ on each channel.
The first screen in the EQ Sub Menu is the bypass screen. The
channels can be bypassed independently or both A&B can be
bypassed together. Press the encoder until the cursor is under
the desired parameter to change and rotate the encoder to
change the bypass mode. Press the cursor to return it to the
upper left corner when done so you can scroll to other screens.
MaxxBass screen
30