Input Mode - Crest Audio Pro-LITE 5.0 Manual Del Propietário

Navigation Overview
The encoder knob to the right of the display is used to navigate
and control the DSP functions. The Channel A and B controls
to the left of the display are also encoders but are dedicated to
adjusting input gain for each channel. Turning the encoder knob
to the right of the display will allow you to scroll through

Input Mode

Crossover / Band-Pass Filters
Memory Lock
Delay
Crest Pro-LITE
® ™
Once the Crest Audio ® screen appears, you can start adjusting
the DSP processor. Pressing the encoder will bring you to the
main menu.
the Main Menu selections. The Main Menu not only allows you
to select a process for editing, but also provides a quick view
of which processes are activated. From left to right the menu
selections are: Input Mode, Volume, Crossover/Band-Pass Filters,
Equalization, Delay, Limiting, Memory and Lock.
Equalization
27
screen
Volume
Limiting