32
MAGIC REMOTE FUNCTIONS
Registering Magic Remote
The Magic Remote operates by pairing with
your TV.
How to register the Magic Remote
To use the Magic Remote, first pair it
with your TV.
1 Put batteries into the Magic
Remote and turn the TV on.
2 Point the Magic Remote at your TV
and press the
(Wheel)
the remote control.
•
If the TV fails to register the Magic
Remote, try again after turning the
TV off and back on.
How to deregister the Magic Remote
Press the
buttons at the same time, for
five seconds, to unpair the Magic
Remote with your TV.
(BACK)
•
Pressing and holding the
(Home)
(EXIT to LIVE) button will let
you cancel and re-register Magic
Remote at once.
How to use Magic Remote
•
Shake the Magic Remote slightly
to the right and left or press
(Home),
make the pointer appear on the
screen. (In some TV models, the
pointer will appear when you turn
the Wheel button.)
•
If the pointer has not been used for
a certain period of time or Magic
Remote is placed on a flat surface,
then the pointer will disappear.
•
If the pointer does not move as
you wish, shake Magic Remote to
the left and right. The pointer will
move to the center of the screen.
•
The Magic Remote depletes
batteries faster than a normal
remote due to the additional
features.
Wheel (OK) on
(BACK) and
(Home)
,
buttons to
Precautions to Take when Using
the Magic Remote
•
Use the Magic remote within the maximum
communication distance 10 m. Using the
remote control beyond this distance, or
with an object obstructing it, may cause a
communication failure.
•
A communication failure may occur due to
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as these use the
same bandwidth (2.4 GHz) as the Magic
remote.
•
The Magic remote may be damaged or may
malfunction if it is dropped or receives a
heavy impact.
•
Take care not to bump into nearby furniture
or other people when using the Magic
remote.
•
Manufacturer and installer cannot provide
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
•
It is recommended that an Access Point (AP)
be located more than 1 m away from the
TV. If the AP is installed closer than 1 m, the
Magic remote may not perform as expected
due to frequency interference.