Registering Magic Remote
The Magic Remote operates by pairing with
your TV.
How to register the Magic Remote
To use the Magic Remote, first pair it
with your TV.
1 Put batteries into the Magic Remote
and turn the TV on.
2 Point the Magic Remote at your TV
and press the
remote control.
(Wheel)
* If the TV fails to register the Magic
Remote, try again after turning the TV
off and back on.
How to deregister the Magic Remote
Press the
(BACK) and
(Smarthome) at the same time, for five
(BACK)
seconds, to unpair the Magic Remote
with your TV.
»
Pressing and holding the
(Smart
button will let you cancel and re-
home)
register Magic Remote at once.
How to use Magic Remote
Wheel (OK) on the
Precautions to Take when
Using the Magic Remote
(Exit)
y
y
y
y
y
y
MAGIC REMOTE FUNCTIONS
Shake the Magic Remote slightly to
y
the right and left or press
(Smarthome),
/INPUT
make the pointer appear on the
screen.
(In some TV models, the pointer will
appear when you turn the Wheel
button.)
If the pointer has not been used for
y
a certain period of time or Magic
Remote is placed on a flat surface,
then the pointer will disappear.
If the pointer does not move as you
y
wish, shake Magic Remote to the
left and right. The pointer will move
to the center of the screen.
The Magic Remote depletes
y
batteries faster than a normal remote
due to the additional features.
Use the Magic remote within the maximum
communication distance (10 m). Using the remote
control beyond this distance, or with an object
obstructing it, may cause a communication failure.
A communication failure may occur due to nearby
devices. Electrical devices such as a microwave
oven or wireless LAN product may cause
interference, as these use the same bandwidth (2.4
GHz) as the Magic remote.
The Magic remote may be damaged or may
malfunction if it is dropped or receives a heavy
impact.
Take care not to bump into nearby furniture or other
people when using the Magic remote.
Manufacturer and installer cannot provide service
related to human safety as the applicable wireless
device has possibility of electric wave interference.
It is recommended that an Access Point (AP) be
located more than 1 m away from the TV. If the
AP is installed closer than 1 m, the Magic remote
may not perform as expected due to frequency
interference.
33
,
buttons to