Temperature Selection; Leveling Instructions - Danby Designer DAR017A2BDD Manual Del Propietário

OPERATING INSTRUCTIONS

TEMPERATURE SELECTION

The temperature of the appliance can be adjusted
by turning the thermostat dial on the back of the
appliance.
The thicker, darker part of the blue line is the coldest
setting.
The thinner, lighter part of the blue line is the
warmest setting.
The "O" position will turn off the cooling function.
Internal temperature of the appliance can vary
based on ambient temperature, the quantity of items
stored and how frequently the door is opened.

LEVELING INSTRUCTIONS

There is an adjustable leg on the bottom of the
appliance that can be turned up or down to ensure
that the appliance is level.
1. Turn the leveling leg counter-clockwise as far as
it will go, until the top of the foot is touching the
bottom of the cabinet.
2. Slowly turn the leveling leg clockwise until the
appliance is level.
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the adjustable foot and the lower
hinge from the bottom right side of the cabinet.
Remove the solid foot from the bottom left side of
the cabinet.
2. Remove the door from the cabinet.
3. Unscrew the upper hinge pin from the right side
worktop and screw it into the hole on the left
side of the worktop.
4. Replace the door on the cabinet.
5. Install the lower hinge and the adjustable foot on
the left side of the cabinet. Install the solid foot
on the right side of the cabinet.
4