Publicidad
Idiomas disponibles
Idiomas disponibles
Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer(s), the screen will go
blank and the 1 (power) indicator will light up in green.
If the function tells you the monitor may have a potential failure,
consult your authorized Sony dealer.
If the picture disappears from the screen and the
1 (power) indicator is green
1
Turn off the 1 (power) switch and disconnect the
video signal cables from the monitor.
2
Turn the monitor on by pressing the 1 (power)
switch.
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cables and check
the condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure.
Displaying this monitor's
information
While the monitor is receiving a video signal, press and
hold the MENU button for more than 5 seconds until the
information box appears.
Press the MENU button again to make the box disappear.
Example
INFORMATION
MENU
Model : SONY SDM-X202
Ser. No. : 1234567
Manufactured : 2002-40
If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-X202
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
• Type of input signals (analog RGB/digital RGB)
Specifications
LCD panel
Input signal format
Resolution
Input signal levels
Audio output
Headphones jack
Audio signal
Power requirements
Power consumption
Operating temperature
Dimensions (width/height/depth)
Model
1: HD15
name
Serial
number
Week and year
of manufacture
Mass
Plug & Play
Included items
* Recommended horizontal and vertical timing condition
Design and specifications are subject to change without notice.
Panel type: a-Si TFT Active Matrix
Picture size: 20.1 inch
RGB operating frequency*
Horizontal:
28–92 kHz (analog RGB)
28–75 kHz (digital RGB)
Vertical:
48–85 Hz (analog RGB)
60 Hz (digital RGB)
Horizontal: Max.1600 dots
Vertical: Max.1200 lines
Analog RGB video signal
0.7 Vp-p, 75 Ω, positive
SYNC signal
TTL level, 2.2 kΩ,
positive or negative
(Separate horizontal and vertical,
or composite sync)
0.3 Vp-p, 75 Ω, negative
(Sync on green)
Digital RGB (DVI) signal: TMDS
(Single link)
1 W × 2
Stereo minijack
0.5 Vrms, 47 kΩ
100 – 240 V, 50 – 60 Hz,
Max. 1.0 A
Max. 80 W
5 – 35
Display (upright):
Approx. 520 × 472 × 256 mm
(20
(with stand)
Approx. 520 × 410 × 98 mm
(20
(without stand)
Approx. 12.0 kg (26 lb. 7 oz.)
(with stand)
Approx. 9.5 kg (20 lb. 15 oz.)
(without stand)
DDC2B
See "Setup."
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
C
°
× 18
× 10
1
5
1
/
/
/
inches)
2
8
8
× 16
× 3
1
1
7
/
/
/
inches)
2
4
8
5
(US)
US
Publicidad
