Fanimation KINDRED Manual Del Usuario página 12

3. Connect wires using connectors as shown in
Figure 4.
RECEIVER HARDWARE USED:
WIRE
CONNECTORS
CAUTION: INCORRECT WIRE CONNECTION
COULD DAMAGE THIS RECEIVER.
L
N
AC POWER
GRAY
YELLOW
RED
BLACK
BLUE
BROWN
4. After connections have been made, put the white and green leads to one side and the black leads
towards the other side, the connection should be turned upward and carefully push leads into the outlet box.
The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one
side of the outlet box and the ungrounded conductor on the other side. (Figure 5)
The blades must be installed first before programming
is performed.
How to Wire Your Ceiling Fan (continued)
x 8
BLACK
WHITE
RECEIVER
BLK-ANT
GREEN / YELLOW
- Ground wire (2)
From Receiver
Listed
Outlet Box
GREEN-Ground Wire
WHITE
From Hanger Bracket
GREEN-Ground Wire
From Hanger Ball
WARNING
Check to see that all connections are tight,
including ground, and that no bare wire is
visible at the wire connectors. Do not operate
fan until the blades are in place. Noise and
motor damage could result.
GROUND
HANGER
BRACKET
HANGER
BALL
Figure 4
Green Wire
from Hanger
Bracket (Ground)
Green Wire
GREEN-
from Receiver (2)
Ground wire
(Ground)
From Ceiling
Green Wire
from Hanger
Ball (Ground)
Figure 5
12
WARNING
BLUE
BROWN
RED
GRAY
YELLOW
WHITE
BLACK
ANTENNA
Green Wire
White Wire
from Supply
from Supply
(Ground)
White Wire
from Receiver
Receiver
DC MOTOR
BLUE
LIGHT KIT
Listed
Outlet Box
Household
Supply
Black Wire
from Supply
Black Wire
from Receiver